RSM 50

SKU#

recsh3xIf6JILFxu9

DESCRIPTION:

The heat and cold resistant RSM 50 is specifically designed for marine and land applications to capture perfectly stabilized data in rough environments. The design of the base plate allows the adaptation of a wide range of cameras and scanners, making the device very versatile for various applications.

Compact and robust Gyro Mount for use in harsh environments
IP Class 67: dust-, salt- and splash-water resistant
Optional higher payload up to 35 kg by using stronger engines
Operation down to -35 °C possible by installation of additional heating elements
Usable with SOMAG Mount Control App

360° cameras
Antennas
Hyperspectral cameras
Infrared cameras
Mobile laser scanners
Thermal imaging cameras
Video cameras

Angular Stabilization Ranges

Pitch at 0° Roll: ≤± 15.5°

Roll at 0° Pitch: ≤± 15.5°

Yaw (Drift): no drift correction

Residual Deviation 1

≤0.4° rms

Payload 2

15 kg | 12.3 kg | 10.5 kg

33.1 lbs | 27.1 lbs | 23.1 lbs

Optional Payload 3

25 kg | 22.5 kg | 19 kg

55.1 lbs | 49.6 lbs | 41.9 lbs

Continuous Torque

8 Nm

Optional Continuous Torque 3

15 Nm

Dynamic Peak Torque 4

16 Nm

Optional Dynamic Peak Torque 3,4

30 Nm

Mass

6.6 kg | 14.5 lbs

Dimensions

Height5

Diameter156.5 mm | 6.2 in

Ø335 mm | Ø13.1 in

IP ClassIP 67Operating Temperature

-30 °C … +55°C | -22 °F…+131 °F

Storage Temperature

-55 °C … +85 °C | -67 °F…+185 °F

Communication Interfaces

USB | RS422 | RS232

Operational Voltage

28 VDC (24…30 VDC)

Average Power Consumption6 at Operational Voltage

70 W

Peak Power Consumption6 at Operational Voltage

130 W

Applied Standards

IACS E10, DNV GL, 2006/42/EC Machinery

Preliminary data, subject to change

1 Vehicle angular motion ≤± 10° / 15°/s / 40°/s2 – small periodical lateral accelerations (≤ 0.2 g) acceptable, constant lateral accelerations for more than 1 minute reduce the performance of the Mount (can be compensated by external GPS input)

2 Possible payload weight depends on lateral acceleration and CoG of payload | shown data is based on 0.3 g lateral acceleration and a CoG payload offset to the Mount surface of: 100 mm (3.9 in) | 200 mm (7.9 in) | 250 mm (9.8 in)

3 Movement reduction in roll and pitch to ≤± 12.5° / Height: 158 mm (6.2 in)

4 Maximum duration 90 s at 55 °C surrounding temperature / longer if temperature inside the unit is < 55 °C

5 Minimum 132.5 mm (5.2 in) | Maximum: 180.5 mm

6 Horizontal payload CoG offsets are not considered; without wind force and other possible external forces